Products Specification
Back
Next
NIKAWA M010
is fast cure 2-component epoxy material. The mixture provides extremelyhigh mechanical strengths, chemicals resistance and excellent bonding strength to conventional building materials.
Technical Properties
:
Part A
Epoxy Binder (Whitish)
Part B
Hardener (Yellowish)
Mix Ratio A:B (By Volume)
1:1
Viscosity
Paste
Pot Life 25©C
Approx. 10 minutes
Tack Free Time @ 25©C
Approx. 16 minutes
Through Cure @ 25©C
Approx. 30 minutes
Tensile Strength psi x 10³
5.9
Flexural Modulus psi x 10³
291
Compress Strength psi x 10³
10.2
Chemical Resistance:
Test Media
Rating
Test Media
Rating
Dilute Acetic Acid
++
Dilute Hydrochloric Acid
++
Dilute Sulphuric Acid
++
Diluted Nitric Acid
++
Concentrate Acid
+
Sdium Hydroxide
++
Ammonia
++
Hydraulic Fluids
++
Diesel
++
Mineral Oil
++
Salt Solution Concentrate
++
Detergent
++
Water
++
Toulene
++
Rating
++
Resistant
+
Limited Resistant
-
Not Resistant
Surface Preparation
:
All surfaces should be dried. cleaned and free from all contaminants.
Application:
Part A and B should be stirred before thoroughly mix until even color is achieved.
Back
Next