| |
NIKAWA 228
is specially formulated, medium viscosity epoxy adhesive
- Sealing difficult caracks in concrete and cinderblock walls.
- High performance assembly adhesive for wood working industry.
|
| |
|
| |
| Technical
Data |
| Part
A |
Epoxy
Binder (Clear Colour) |
| Part
B |
Hardener
(Amber Colour) |
| Viscosity
of Mix @ 25©C (pa.s) |
Approx.
128 |
| Colour
of Mix |
Light
Amber |
| Mix
Ratio A:B (By Volume) |
1:1 |
| Pot
Life (TECAM) 250gm @ 20©C |
60
minutes |
| Cure
Time @ 20-25©C |
24
hours |
| Specific
Gravity |
1.1
g/cm³ |
Physical
Properties
Tensile Shear Strength (DIN 53283) |
|
Material
|
Hardening
|
Test
Temperature
|
N/mm²
|
|
Steel
|
4 hours
|
20©C
|
10
|
|
Steel
|
8 hours
|
20©C
|
25
|
|
Steel
|
24 hours
|
20©C
|
29
|
| Peel
Strength (DIN 53282) |
|
Material
|
Hardening
|
Test
Temperature
|
N/mm²
|
|
Steel,
Pickled
|
24 hours
|
20©C
|
4-7
|
| Surface
Preparation |
| All
surfaces should be dried. cleaned and free from all contaminants. |
Application
Data:
Mix thoroughly until even colour is achieved |
| Brush |
-
suitable |
| Roller |
-
suitable |
| Cartridge
Dispensing System |
-
suitable |
| Cleaner |
-
Nikawa Cleaner |
| Packaging
Size |
| Metal Can: 2 litres
and 10 litres |
Note:
Do not mix more than 500 gm at a time as the pot life will be
shortened, caused by generation of exothermal.
To spped up the curing time heat up the assembly after application. |
|
|
