Products Specification
Back Next
 
NIKAWA 260H is a high performance 2-component epoxies adhesive and is specially formulated for wood working industries.
   
 
Technical Properties
Part A Epoxy Binder (Yellow Color)
Part B Hardener (Brown Color)
Mix Ratio A:B (By Volume) 1:1
Viscosity of Mix (PaS) at 25©C Approx. 138
S.G. kg/litre 1.3
Pot Life at 20©C Approx. 30 minutes
Cure Time at 20-25©C Minimum 24 hours
Hardening Condition 7 days at 20©C
Tensile Strength (ASTM C307) 24 N/mm²
Compressive Strength 70-80 N/mm²
Tensile Strength in Flexure (Din 1164) 30-40 N/mm²
Peel Strength (Din 53282) 3-6 N/mm²
Coefficient of Linear Thermal Expansion 60.10-6/©C
Water Absorption (DIN 53475) 24h Cold 34mg

Chemical Resistance
Test Media
Rating
Test Media
Rating
Dilute Acetic Acid
++
Dilute Hydrochloric Acid
++
Dilute Sulphuric Acid
++
Diluted Nitric Acid
++
Concentrate Acid
+
Sdium Hydroxide
++
Ammonia
++
Hydraulic Fluids
++
Diesel
++
Mineral Oil
++
Salt Solution Concentrate
++
Detergent
++
Water
++
Toulene
++

Rating
++ Resistant
+ Limited Resistant
- Not Resistant

Surface Preparation:
All surfaces should be dried. cleaned and free from all contaminants.

Application:
Part A and B should be stirred before thoroughly mix until even color is achieved.

 

Back Next