|
NIKAWA
M030 is specially formulated,
a high performance two component epoxy adhesive. It has
- |
Superior mechanical strength |
- |
Excellent bonding strength
to wood, concrete, fibreglass, glass, ceramic, marble, metal,
many plastics and other surfaces. |
- |
Thermal resistant |
- |
Water resistance |
|
|
Technical
Properties: |
Part
A |
Epoxy
Binder (Light Grey Color) |
Part
B |
Hardener
(Red Color) |
Viscosity |
Paste |
Mix
Ratio A:B (By Volume) |
1(A):1(B) |
Pot
Life (TECAM) 250gm @ 20©C |
35
minutes |
Cure
Time at 20-25©C |
24
hours |
Specific
Gravity |
1.2-1.3
g/cm³ |
Physical
Properties:
Tensile Shear Strength (Din 53283) |
Material
|
Heardning
|
Test
Temperature
|
N/mm²
|
Steel
|
4 hours
|
20©C
|
13
|
Steel
|
8 hours
|
20©C
|
26
|
Steel
|
24 hours
|
20©C
|
33
|
Peel
Strength (Din 53283) |
Material
|
Heardning
|
Test
Temperature
|
N/mm²
|
Steel,
Piclked
|
24
hours
|
20©C
|
7-11
|
Surface
Preparation: |
All surfaces should
be dried, cleaned and free from all contaminants. |
Application
Data: |
Mix
thoroughly until even colour (Grey) is achieved |
Brush |
-
suitable |
Roller |
- suitable |
Cartridge
Dispensing System |
- suitable |
|
Packaging
Size: |
Metal Can: 10kg (5
kg Part A and 5 kg Part B) |
Note: Do not mix
exceed at a time as the pot life will be shortened, caused
by generation of exothermal and consequently change the rheological
properties. To speed up the curing time, heat up the assembly
after application.
|
|
|
|
|